Crimson Trace FAQ

 
QS
How are Lasergrips activated?
Do they work both right- and left-handed? A great feature of Lasergrips is that they turn on simply by holding your gun in a natural firing grip. You don’t need to flip a switch or do anything differently. A natural grip on the firearm will activate the laser. Depending on the model, Lasergrips have either a front activation button or middle-finger activation buttons on both sides of the grip. Either style works equally well for right- and left-handed shooting.
Are Lasergrips weatherproof?
Lasergrips are weatherproof so there’s no risk taking them in the heavy rain or splashing them. Submerging them in water, while not recommended, will not destroy the laser sight. If they are submerged, take them off, remove the batteries and allow to air dry.
How far is the laser visible?
Crimson Trace has the most powerful beam allowed by law, a Class IIIa visible light diode. At night, in reduced light and indoors the laser is highly visible up to several hundred yards. Under bright sunlight, the dot can be seen up to 15 yards away. Lighter-colored surfaces reflect laser light better than darker surfaces. The lighter the surface, the brighter the laser dot will be and the farther away it can be seen.
How long will my batteries last? Where can I get them?
Almost all Crimson Trace Lasergrips use #2032 batteries. Batteries provide over four (4) hours of “ON” time. (LG-525 uses a 123 battery with up to 20 hours of “ON”.) These batteries are readily available and inexpensive.
How do I sight them in?
Lasergrips are factory-sighted to approximate point-of-impact at 50-feet. Unlike most other laser sights, you can adjust them if needed by turning the tiny windage (side) and elevation (top) screws with the small hex wrenches provided with your Lasergrips. A good starting point is to establish your normal sight picture and line up the laser dot with the iron sights — this may be all the adjustment needed. (“Sight picture” simply means evenly aligning the notch in your back sights with the post in your front sight in a level, straight line.) For further tuning on the range, fire a few rounds at the target. After seeing where the bullets are hitting, you can adjust the laser to the actual point of impact. For example, if the laser is pointing at the center of the target, but the bullets are impacting low and right, move the laser down and to the right.

Visit these authorized dealers for a complete Crimson Trace inventory, best prices and free shipping.

NightvisionSales.com

Visit NightvisionSales.com

Visit Lasersales.com

Sorry, the comment form is closed at this time.